Effect of accelerator on the crosslink density and mechanical behaviour of an SBR-filled elastomer

Spathis, G; Kontou, E; Saklabani, A

dc.contributor.author	Spathis, G	en
dc.contributor.author	Kontou, E	en
dc.contributor.author	Saklabani, A	en
dc.date.accessioned	2014-03-01T01:08:34Z
dc.date.available	2014-03-01T01:08:34Z
dc.date.issued	1991	en
dc.identifier.issn	0731-6844	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/10581
dc.subject.classification	Materials Science, Composites	en
dc.subject.classification	Polymer Science	en
dc.subject.other	Carbon Black	en
dc.subject.other	Mathematical Techniques - Curve Fitting	en
dc.subject.other	Polybutadienes - Crosslinking	en
dc.subject.other	Rubber Testing - Tensile Tests	en
dc.subject.other	Vulcanization - Agents	en
dc.subject.other	Accelerator Effect	en
dc.subject.other	Carbon Black Filled Elastomers	en
dc.subject.other	Crosslink Density	en
dc.subject.other	SBR Elastomers	en
dc.subject.other	Stress Strain Equilibrium Curves	en
dc.subject.other	Styrene Butadiene Rubber (SBR)	en
dc.subject.other	Elastomers	en
dc.title	Effect of accelerator on the crosslink density and mechanical behaviour of an SBR-filled elastomer	en
heal.type	journalArticle	en
heal.identifier.primary	10.1177/073168449101000404	en
heal.identifier.secondary	http://dx.doi.org/10.1177/073168449101000404	en
heal.language	English	en
heal.publicationDate	1991	en
heal.abstract	The effect of accelerator to sulfur ratio variation on the crosslink density of an SBR-carbon black filled elastomer has been studied. Moreover, the reinforcement effect of the inclusions as well as the type of rubber attachment on the filer surface with varying the accelerator content has also been examined. DSC tests and swelling measurements have been made for the studying of the chemical crosslinking. Equilibrium stress-strain tests and tensile-retraction measurements have been carried out for the determination of the mechanical behaviour of the materials tested. The Mooney-Rivlin relation was used to describe the behaviour of the rubber matrix and values of constants C1, C2 have been calculated with the use of the strain amplification factor.	en
heal.publisher	TECHNOMIC PUBL CO INC	en
heal.journalName	Journal of Reinforced Plastics and Composites	en
dc.identifier.doi	10.1177/073168449101000404	en
dc.identifier.isi	ISI:A1991FX50000004	en
dc.identifier.volume	10	en
dc.identifier.issue	4	en
dc.identifier.spage	391	en
dc.identifier.epage	399	en