Mass transfer model building in drying

Kiranoudis, CT; Maroulis, ZB; Marinos-Kouris, D

dc.contributor.author	Kiranoudis, CT	en
dc.contributor.author	Maroulis, ZB	en
dc.contributor.author	Marinos-Kouris, D	en
dc.date.accessioned	2014-03-01T01:09:26Z
dc.date.available	2014-03-01T01:09:26Z
dc.date.issued	1993	en
dc.identifier.issn	0737-3937	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/10989
dc.subject	MECHANISTIC MASS TRANSFER MODELS	en
dc.subject	ONE RESPONSE PARAMETER ESTIMATION	en
dc.subject	DIRECT REGRESSION ANALYSIS	en
dc.subject	MOISTURE DIFFUSION	en
dc.subject.classification	Engineering, Chemical	en
dc.subject.classification	Engineering, Mechanical	en
dc.subject.other	Diffusion	en
dc.subject.other	Mass transfer	en
dc.subject.other	Mathematical models	en
dc.subject.other	Moisture	en
dc.subject.other	Parameter estimation	en
dc.subject.other	Regression analysis	en
dc.subject.other	Mass transfer model	en
dc.subject.other	Moisture diffusion	en
dc.subject.other	One response parameter estimation	en
dc.subject.other	Drying	en
dc.title	Mass transfer model building in drying	en
heal.type	journalArticle	en
heal.identifier.primary	10.1080/07373939308916898	en
heal.identifier.secondary	http://dx.doi.org/10.1080/07373939308916898	en
heal.language	English	en
heal.publicationDate	1993	en
heal.abstract	The objective of much experimentation in drying is to build or discover a suitable model for a drying system. In this study, an attempt is made to formulate an approach to the problem of iteratively improving models, guided by the inefficiences of an initial tested model. This model involved both moisture diffusion coefficient and external mass transfer coefficient. A statistical analysis was applied to the residual populations created by fitting a model to the experimental data, so as to exhibit possible model inadequacies. Inspection of the tendencies produced, suggested what modifications were necessary for improvement. The cycle was repeated until an adequate model was found.	en
heal.publisher	MARCEL DEKKER INC	en
heal.journalName	Drying Technology	en
dc.identifier.doi	10.1080/07373939308916898	en
dc.identifier.isi	ISI:A1993LU24500005	en
dc.identifier.volume	11	en
dc.identifier.issue	6	en
dc.identifier.spage	1251	en
dc.identifier.epage	1270	en