Wear behaviour of alumina plasma-sprayed coating on an AlCu alloy

Koutsomichalis, A; Panagopoulos, C; Badekas, H

dc.contributor.author	Koutsomichalis, A	en
dc.contributor.author	Panagopoulos, C	en
dc.contributor.author	Badekas, H	en
dc.date.accessioned	2014-03-01T01:09:37Z
dc.date.available	2014-03-01T01:09:37Z
dc.date.issued	1993	en
dc.identifier.issn	0167-577X	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/11111
dc.subject	Plasma Spraying	en
dc.subject.classification	Materials Science, Multidisciplinary	en
dc.subject.classification	Physics, Applied	en
dc.subject.other	Alumina	en
dc.subject.other	Aluminum alloys	en
dc.subject.other	Plasma devices	en
dc.subject.other	Scanning electron microscopy	en
dc.subject.other	Wear of materials	en
dc.subject.other	Taber abraser	en
dc.subject.other	Sprayed coatings	en
dc.title	Wear behaviour of alumina plasma-sprayed coating on an AlCu alloy	en
heal.type	journalArticle	en
heal.identifier.primary	10.1016/0167-577X(93)90049-4	en
heal.identifier.secondary	http://dx.doi.org/10.1016/0167-577X(93)90049-4	en
heal.language	English	en
heal.publicationDate	1993	en
heal.abstract	Aluminum oxide was plasma sprayed on the surface of Al-4% Cu alloy substrate. The morphology of the coating was studied thoroughly using optical and scanning electron microscopy. The abrasive wear behaviour of the alumina coating was examined using the disk on disk method (Taber abraser). The wear rate of the coating was higher at the beginning of the wear tests and depended on the applied load. A linear relationship was observed between the wear rate and the initial surface roughness of the coating. © 1993.	en
heal.publisher	ELSEVIER SCIENCE BV	en
heal.journalName	Materials Letters	en
dc.identifier.doi	10.1016/0167-577X(93)90049-4	en
dc.identifier.isi	ISI:A1993MJ85900005	en
dc.identifier.volume	18	en
dc.identifier.issue	1-2	en
dc.identifier.spage	19	en
dc.identifier.epage	24	en