dc.contributor.author |
Moschakis, MN |
en |
dc.contributor.author |
Hatziargyriou, ND |
en |
dc.date.accessioned |
2014-03-01T01:23:36Z |
|
dc.date.available |
2014-03-01T01:23:36Z |
|
dc.date.issued |
2006 |
en |
dc.identifier.issn |
0885-8977 |
en |
dc.identifier.uri |
https://dspace.lib.ntua.gr/xmlui/handle/123456789/17044 |
|
dc.subject |
Critical distance |
en |
dc.subject |
Fault positions |
en |
dc.subject |
Monte Carlo |
en |
dc.subject |
Power system analysis |
en |
dc.subject |
Voltage sags |
en |
dc.subject.classification |
Engineering, Electrical & Electronic |
en |
dc.subject.other |
Electric fault currents |
en |
dc.subject.other |
Electric fault location |
en |
dc.subject.other |
Electric network analysis |
en |
dc.subject.other |
Electric power systems |
en |
dc.subject.other |
Electric transformers |
en |
dc.subject.other |
Monte Carlo methods |
en |
dc.subject.other |
Voltage control |
en |
dc.subject.other |
Voltage measurement |
en |
dc.subject.other |
Critical distance |
en |
dc.subject.other |
Power system analysis |
en |
dc.subject.other |
Voltage sags |
en |
dc.subject.other |
Transmission network calculations |
en |
dc.title |
Analytical calculation and stochastic assessment of voltage sags |
en |
heal.type |
journalArticle |
en |
heal.identifier.primary |
10.1109/TPWRD.2006.874108 |
en |
heal.identifier.secondary |
http://dx.doi.org/10.1109/TPWRD.2006.874108 |
en |
heal.language |
English |
en |
heal.publicationDate |
2006 |
en |
heal.abstract |
In this paper, analytical expressions for the calculation of voltage sag magnitude due to faults at every point of a meshed or radial power network are derived. Balanced and unbalanced faults are considered and the effect of power transformers is taken into account. The following methods for stochastic assessment of voltage sag magnitude are compared using these expressions: the method of critical distances, method of fault positions, and Monte Carlo method. The minimum required number of fault positions and iterations assumed by the two methods in order to achieve results of acceptable accuracy are determined. © 2006 IEEE. |
en |
heal.publisher |
IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC |
en |
heal.journalName |
IEEE Transactions on Power Delivery |
en |
dc.identifier.doi |
10.1109/TPWRD.2006.874108 |
en |
dc.identifier.isi |
ISI:000238704500090 |
en |
dc.identifier.volume |
21 |
en |
dc.identifier.issue |
3 |
en |
dc.identifier.spage |
1727 |
en |
dc.identifier.epage |
1734 |
en |