Estimation of Elastic Moduli of Particulate Composites by New Models and Comparison with Moduli Measured by Tension, Dynamic, and Ultrasonic Tests

Bourkas, G; Prassianakis, I; Kytopoulos, V; Sideridis, E; Younis, C

dc.contributor.author	Bourkas, G	en
dc.contributor.author	Prassianakis, I	en
dc.contributor.author	Kytopoulos, V	en
dc.contributor.author	Sideridis, E	en
dc.contributor.author	Younis, C	en
dc.date.accessioned	2014-03-01T01:33:25Z
dc.date.available	2014-03-01T01:33:25Z
dc.date.issued	2010	en
dc.identifier.issn	1687-6822	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/20408
dc.subject	Elastic Moduli	en
dc.subject	Particulate Composite	en
dc.subject	Ultrasonic Testing	en
dc.subject.other	MECHANICAL PROPERTIES	en
dc.subject.other	MULTIPHASE MATERIALS	en
dc.subject.other	POLYMER COMPOSITES	en
dc.subject.other	FILLED POLYMERS	en
dc.subject.other	INTERPHASE	en
dc.subject.other	REINFORCEMENT	en
dc.subject.other	CONSTANTS	en
dc.title	Estimation of Elastic Moduli of Particulate Composites by New Models and Comparison with Moduli Measured by Tension, Dynamic, and Ultrasonic Tests	en
heal.type	journalArticle	en
heal.identifier.primary	10.1155/2010/891824	en
heal.identifier.secondary	http://dx.doi.org/10.1155/2010/891824	en
heal.identifier.secondary	891824	en
heal.language	English	en
heal.publicationDate	2010	en
heal.abstract	The elastic constants of particulate composites are evaluated employing a theoretical cube-within-cube formation. Two new models of four and five components, respectively, formed by geometrical combination of three-component models existing in the literature, are used as Representative Volume Elements. Using the governing stress and strain equations of the proposed models, two new equations providing the static elastic and shear moduli of particulate composites are formulated. In order to obtain the dynamic elastic and shear moduli, the correspondence principle was applied successively to components connected in series and/or in parallel. The results estimated by the proposed models were compared with values evaluated from existing formulae in the literature, as well as with values obtained by tensile, dynamic, and ultrasonic experiments in epoxy/iron particulate composites. They were found to be close to values obtained by static and dynamic measurements and enough lower compared with values obtained from ultrasonic experiments. The latter is attributed to the high frequency of ultrasonics. Since measurements from ultrasonic's and from dynamic experiments depend on the frequency, the modulus of elasticity estimated by ultrasonic's is compared with that (storage modulus) estimated by dynamic experiments.	en
heal.publisher	HINDAWI PUBLISHING CORPORATION	en
heal.journalName	ADVANCES IN MATERIALS SCIENCE AND ENGINEERING	en
dc.identifier.doi	10.1155/2010/891824	en
dc.identifier.isi	ISI:000289370800001	en