Tooth compliance and load distribution of spur gears

Costopoulos, Th; Spyropoulou, M

dc.contributor.author	Costopoulos, Th	en
dc.contributor.author	Spyropoulou, M	en
dc.date.accessioned	2014-03-01T01:42:42Z
dc.date.available	2014-03-01T01:42:42Z
dc.date.issued	1994	en
dc.identifier.issn	07612516	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/23908
dc.relation.uri	http://www.scopus.com/inward/record.url?eid=2-s2.0-0028599819&partnerID=40&md5=9cab6dc314d1afad717f5cdd507c24bb	en
dc.subject.other	Algorithms	en
dc.subject.other	Compression testing	en
dc.subject.other	Deformation	en
dc.subject.other	Dynamic loads	en
dc.subject.other	Elasticity	en
dc.subject.other	Pressure	en
dc.subject.other	Load distribution	en
dc.subject.other	Pinion	en
dc.subject.other	Pressure angle	en
dc.subject.other	Spur gears	en
dc.subject.other	Tooth compliance	en
dc.subject.other	Gear teeth	en
dc.title	Tooth compliance and load distribution of spur gears	en
heal.type	journalArticle	en
heal.publicationDate	1994	en
heal.abstract	An algorithm has been developed for the calculation of compliance of the teeth of spur gears and also for the evaluation of the load distribution among the teeth as the gears are in mesh. Results may be found for any permissible gear ratio and any number of teeth of pinion and also for any value of pressure angle and any value of the tooth addendum.	en
heal.journalName	Modelling, simulation & control. B	en
dc.identifier.volume	54	en
dc.identifier.issue	3-4	en
dc.identifier.spage	23	en
dc.identifier.epage	30	en