Structure, mechanical and tribological properties of sputtered TiAlBN thin films

Rebholz, C; Schneider, J; Voevodin, A; Steinebrunner, J; Charitidis, C; Logothetidis, S; Leyland, A; Matthews, A

dc.contributor.author	Rebholz, C	en
dc.contributor.author	Schneider, J	en
dc.contributor.author	Voevodin, A	en
dc.contributor.author	Steinebrunner, J	en
dc.contributor.author	Charitidis, C	en
dc.contributor.author	Logothetidis, S	en
dc.contributor.author	Leyland, A	en
dc.contributor.author	Matthews, A	en
dc.date.accessioned	2014-03-01T01:48:21Z
dc.date.available	2014-03-01T01:48:21Z
dc.date.issued	1999	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/25463
dc.subject	Elastic Moduli	en
dc.subject	Elastic Modulus	en
dc.subject	Friction Coefficient	en
dc.subject	Nitrogen Content	en
dc.subject	Sliding Wear	en
dc.subject	Thin Film	en
dc.title	Structure, mechanical and tribological properties of sputtered TiAlBN thin films	en
heal.type	journalArticle	en
heal.identifier.primary	10.1016/S0257-8972(98)00840-8	en
heal.identifier.secondary	http://dx.doi.org/10.1016/S0257-8972(98)00840-8	en
heal.publicationDate	1999	en
heal.abstract	TiAlBN films were produced by simultaneously sputtering from TiAl and TiB2 targets in Ar/N2 mixtures at a substrate temperature of 150°C. The goal of this investigation was to study the influence of the nitrogen content (0–40at.%) on two sets of four coatings with B/Al ratios of approximately 1 and 5. All coatings showed very dense structures and were mainly found	en
heal.journalName	Surface & Coatings Technology	en
dc.identifier.doi	10.1016/S0257-8972(98)00840-8	en