dc.contributor.author |
Gazis, N |
en |
dc.contributor.author |
Riddone, G |
en |
dc.contributor.author |
Mainaud, H |
en |
dc.contributor.author |
Gudkov, D |
en |
dc.contributor.author |
Samoshkin, A |
en |
dc.contributor.author |
Simopoulos, S |
en |
dc.contributor.author |
Hinis, E |
en |
dc.contributor.author |
Alexopoulos, T |
en |
dc.date.accessioned |
2014-03-01T02:04:10Z |
|
dc.date.available |
2014-03-01T02:04:10Z |
|
dc.date.issued |
2011 |
en |
dc.identifier.issn |
17919320 |
en |
dc.identifier.uri |
https://dspace.lib.ntua.gr/xmlui/handle/123456789/29394 |
|
dc.relation.uri |
http://www.scopus.com/inward/record.url?eid=2-s2.0-84863194376&partnerID=40&md5=c56ecd91102be8b488d9502dbd594bc8 |
en |
dc.subject |
Actuator |
en |
dc.subject |
Alignment |
en |
dc.subject |
Base |
en |
dc.subject |
CLIC |
en |
dc.subject |
Epument |
en |
dc.subject |
Girder |
en |
dc.subject |
Mineral cast |
en |
dc.subject |
SiC |
en |
dc.subject |
Stabilisation |
en |
dc.subject |
Supporting system |
en |
dc.subject |
V-shaped support |
en |
dc.subject |
V-support |
en |
dc.subject.other |
Base |
en |
dc.subject.other |
CLIC |
en |
dc.subject.other |
Epument |
en |
dc.subject.other |
SiC |
en |
dc.subject.other |
Supporting systems |
en |
dc.subject.other |
V-support |
en |
dc.subject.other |
Actuators |
en |
dc.subject.other |
Alignment |
en |
dc.subject.other |
Silicon carbide |
en |
dc.subject.other |
Stabilization |
en |
dc.subject.other |
Tellurium compounds |
en |
dc.subject.other |
Beams and girders |
en |
dc.title |
Study of the supporting system for the clic two-beam module |
en |
heal.type |
journalArticle |
en |
heal.publicationDate |
2011 |
en |
heal.abstract |
The Compact Linear Collider (CLIC) study aims at the development of a Multi-TeV e+ e-collider. The micro-precision CLIC structures will have an accelerating gradient of 100 MV/m and will be aligned on so-called girders. The girder construction constrains are mainly dictated by the beam physics and RF requirements. The study of such girders is a challenging case involving material choice, mechanical design as well as prototype fabrication and experimental testing. © 2011 Kavala Institute of Technology. |
en |
heal.journalName |
Journal of Engineering Science and Technology Review |
en |
dc.identifier.volume |
4 |
en |
dc.identifier.issue |
2 |
en |
dc.identifier.spage |
201 |
en |
dc.identifier.epage |
206 |
en |