Spray forming of al alloys: Experiment and theory

Antipas, GSE

dc.contributor.author	Antipas, GSE	en
dc.date.accessioned	2014-03-01T02:14:39Z
dc.date.available	2014-03-01T02:14:39Z
dc.date.issued	2012	en
dc.identifier.issn	15161439	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/30077
dc.subject	Al alloys	en
dc.subject	Gas atomization	en
dc.subject	Liquid break up	en
dc.subject	Spray forming	en
dc.subject	Surface wave formation	en
dc.subject	Two phase flow	en
dc.subject.other	Al alloys	en
dc.subject.other	Convergence region	en
dc.subject.other	Gas atomization	en
dc.subject.other	Median diameters	en
dc.subject.other	Pitot tubes	en
dc.subject.other	Spray forming	en
dc.subject.other	Two-phase model	en
dc.subject.other	Wave formation	en
dc.subject.other	Spray steelmaking	en
dc.subject.other	Supersonic aerodynamics	en
dc.subject.other	Surface waves	en
dc.subject.other	Two phase flow	en
dc.subject.other	Alloys	en
dc.title	Spray forming of al alloys: Experiment and theory	en
heal.type	journalArticle	en
heal.identifier.primary	10.1590/S1516-14392012005000007	en
heal.identifier.secondary	http://dx.doi.org/10.1590/S1516-14392012005000007	en
heal.publicationDate	2012	en
heal.abstract	Close coupled gas atomization has been studied. Pitot tube gas flow measurements support a postulate of transition from an initial sonic to a supersonic and a final sonic state along the convergence region of the jets. Predictions of the d50 median diameter utilizing a two phase model for primary and secondary break up correlate strongly with experimental results from He-atomized Al alloys by a factor of 0.8216.	en
heal.journalName	Materials Research	en
dc.identifier.doi	10.1590/S1516-14392012005000007	en
dc.identifier.volume	15	en
dc.identifier.issue	1	en
dc.identifier.spage	131	en
dc.identifier.epage	135	en