Design and implementation of a 1 -V low flicker noise direct conversion mixer at 5.5 GHz using a 90nm CMOS RF technology

Paschalis, S; Eleni-Sotiria, K; Antonios, B; Yannis, P

dc.contributor.author	Paschalis, S	en
dc.contributor.author	Eleni-Sotiria, K	en
dc.contributor.author	Antonios, B	en
dc.contributor.author	Yannis, P	en
dc.date.accessioned	2014-03-01T02:44:34Z
dc.date.available	2014-03-01T02:44:34Z
dc.date.issued	2007	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/31874
dc.subject	Design and Implementation	en
dc.subject	Flicker Noise	en
dc.subject.other	CMOS integrated circuits	en
dc.subject.other	Computer networks	en
dc.subject.other	Networks (circuits)	en
dc.subject.other	Spurious signal noise	en
dc.subject.other	CMOS RF	en
dc.subject.other	Direct-conversion mixer	en
dc.subject.other	International conferences	en
dc.subject.other	Mixing	en
dc.title	Design and implementation of a 1 -V low flicker noise direct conversion mixer at 5.5 GHz using a 90nm CMOS RF technology	en
heal.type	conferenceItem	en
heal.identifier.primary	10.1109/ICECS.2007.4511064	en
heal.identifier.secondary	http://dx.doi.org/10.1109/ICECS.2007.4511064	en
heal.identifier.secondary	4511064	en
heal.publicationDate	2007	en
heal.abstract	In this paper a direct conversion mixer that adopts a passive mixing stage and achieves very good flicker noise performance is presented. The mixer achieves 7.4 dB of voltage conversion gain with a flicker noise corner frequency of 2 kHz and Third Order Input Intercept Point (IIP3) of 10 dBm. The circuit consumes only 4.5 mW from a 1 - V supply and it was implemented in a 90nm CMOS RF technology. ©2007 IEEE.	en
heal.journalName	Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems	en
dc.identifier.doi	10.1109/ICECS.2007.4511064	en
dc.identifier.spage	605	en
dc.identifier.epage	608	en