A fast 0.25um CMOS current-mode front-end stage for solid state detector interfaces

Zervakis, Em; Haralabidis, N

dc.contributor.author	Zervakis, Em	en
dc.contributor.author	Haralabidis, N	en
dc.date.accessioned	2014-03-01T02:49:11Z
dc.date.available	2014-03-01T02:49:11Z
dc.date.issued	2002	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/34397
dc.subject.other	CMOS technology	en
dc.subject.other	Current mode	en
dc.subject.other	Current-mode circuit	en
dc.subject.other	Differential output	en
dc.subject.other	Dynamic range	en
dc.subject.other	High speed	en
dc.subject.other	Low-power consumption	en
dc.subject.other	Power Consumption	en
dc.subject.other	Solid state detectors	en
dc.subject.other	CMOS integrated circuits	en
dc.subject.other	Semiconductor detectors	en
dc.title	A fast 0.25um CMOS current-mode front-end stage for solid state detector interfaces	en
heal.type	conferenceItem	en
heal.identifier.primary	10.1109/ICECS.2002.1045379	en
heal.identifier.secondary	http://dx.doi.org/10.1109/ICECS.2002.1045379	en
heal.identifier.secondary	1045379	en
heal.publicationDate	2002	en
heal.abstract	An 8-channel preamplifier has been designed in 0.25um CMOS technology for use in solid state detectors systems. The preamplifier is a current-mode circuit providing the ability for high speed and low power consumption. The operation of the preamplifier is optimized for detectors with large capacitance of 45pF. It has differential output and the baseline can be externally adjusted. A self-adjustable circuit for compensating the leakage current of the detector is also included. The dynamic range of the front-end stage is very large from 150fC to 1500fC. With power consumption 2.5mW, the peaking time was measured around 25ns while the gain 0.3mV/fC. © 2002 IEEE.	en
heal.journalName	Proceedings of the IEEE International Conference on Electronics, Circuits, and Systems	en
dc.identifier.doi	10.1109/ICECS.2002.1045379	en
dc.identifier.volume	1	en
dc.identifier.spage	243	en
dc.identifier.epage	246	en