Shrinkage stress concentrations in plane two-phase systems

Theocaris, PS; Marketos, E

dc.contributor.author	Theocaris, PS	en
dc.contributor.author	Marketos, E	en
dc.date.accessioned	2014-03-01T01:05:28Z
dc.date.available	2014-03-01T01:05:28Z
dc.date.issued	1970	en
dc.identifier.issn	00150568	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/8847
dc.subject	Stress Concentration	en
dc.title	Shrinkage stress concentrations in plane two-phase systems	en
heal.type	journalArticle	en
heal.identifier.primary	10.1016/0015-0568(70)90024-2	en
heal.identifier.secondary	http://dx.doi.org/10.1016/0015-0568(70)90024-2	en
heal.publicationDate	1970	en
heal.abstract	The paper deals with the stress concentration created by shrinkage of the matrix in a two-phase material. Cross-sections of two-phase materials prepared from plasticised epoxy polymers cast around circular inclusions made of pure epoxy polymer were photoelastically investigated. It was found that for a single inclusion in an extended matrix the stress distribution in the matrix slightly depends on the matrix elastic modulus. For an array of closely spaced inclusions in a triangular arrangement the stress distribution around the inclusions varied with the elastic moduli of both phases. The influence of the clear distance between inclusions on the stress distribution was studied and the values of the stress concentration at the interface and the axes of the array were given. © 1970.	en
heal.journalName	Fibre Science and Technology	en
dc.identifier.doi	10.1016/0015-0568(70)90024-2	en
dc.identifier.volume	3	en
dc.identifier.issue	1	en
dc.identifier.spage	21	en
dc.identifier.epage	38	en