Adhesion efficiency and volume fraction of the boundary interphase in metal-filled epoxies

Spathis, GD; Sideridis, EP; Theocaris, PS

dc.contributor.author	Spathis, GD	en
dc.contributor.author	Sideridis, EP	en
dc.contributor.author	Theocaris, PS	en
dc.date.accessioned	2014-03-01T01:05:53Z
dc.date.available	2014-03-01T01:05:53Z
dc.date.issued	1981	en
dc.identifier.issn	01437496	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/9053
dc.subject	Volume Fraction	en
dc.subject.other	ADHESIVES	en
dc.subject.other	COMPOSITE MATERIALS	en
dc.subject.other	EPOXY RESINS	en
dc.subject.other	ADHESION	en
dc.title	Adhesion efficiency and volume fraction of the boundary interphase in metal-filled epoxies	en
heal.type	journalArticle	en
heal.identifier.primary	10.1016/0143-7496(81)90051-8	en
heal.identifier.secondary	http://dx.doi.org/10.1016/0143-7496(81)90051-8	en
heal.publicationDate	1981	en
heal.abstract	A model describing the influence of spherical inclusions on the mechanical behaviour of composite materials is presented. Simple theoretical considerations led to the conclusion that the law of mixtures is a good approxiamtion for particle composites. Deviations of the experimental results from the law of mixtures were however verified. For an explanation of these deviations the model was treated in a more realistic way, introducing first a factor of adhesion between matrix and filler and then the concept of interphase. To verify these assumptions a test was established to estimate the degree of adhesion in the particle/composite materials and the factors which were correlated with this phenomenon. For the study of the properties of interphase around the filler, a series of experiments based on differential scanning calorimetry was carried out. From this analysis the volume content of interphase was calculated and hence some important mechanical properties of interphase, were established. © 1981.	en
heal.journalName	International Journal of Adhesion and Adhesives	en
dc.identifier.doi	10.1016/0143-7496(81)90051-8	en
dc.identifier.volume	1	en
dc.identifier.issue	4	en
dc.identifier.spage	195	en
dc.identifier.epage	201	en