The influence of fibre pretreatmert on the mechanical properties of epoxy-asbestos composites

Papanicolaou, GC; Papaspyrides, CD

dc.contributor.author	Papanicolaou, GC	en
dc.contributor.author	Papaspyrides, CD	en
dc.date.accessioned	2014-03-01T01:07:00Z
dc.date.available	2014-03-01T01:07:00Z
dc.date.issued	1987	en
dc.identifier.issn	02540584	en
dc.identifier.uri	https://dspace.lib.ntua.gr/xmlui/handle/123456789/9736
dc.subject	Mechanical Property	en
dc.subject.other	ASBESTOS - Coatings	en
dc.subject.other	MATERIALS TESTING - Tensile Tests	en
dc.subject.other	PLASTICS, REINFORCED - Mechanical Properties	en
dc.subject.other	POLYAMIDES - Applications	en
dc.subject.other	CHRYSOTILE	en
dc.subject.other	EPOXY-ASBESTOS COMPOSITES	en
dc.subject.other	INTERFACIAL	en
dc.subject.other	POLY (HEXAMETHYLENE ADIPAMIDE)	en
dc.subject.other	EPOXY RESINS	en
dc.title	The influence of fibre pretreatmert on the mechanical properties of epoxy-asbestos composites	en
heal.type	journalArticle	en
heal.identifier.primary	10.1016/0254-0584(87)90095-2	en
heal.identifier.secondary	http://dx.doi.org/10.1016/0254-0584(87)90095-2	en
heal.publicationDate	1987	en
heal.abstract	This study is devoted to the mechanical properties of asbestos-epoxy composites. Chrysotile fibres were first pretreated by means of an interfacial polymerization technique effecting eventually a poly (hexamethylene adipamide) coating on the asbestos surface. The interface characteristics were significantly altered and due to the well-known compatibility between epoxy and polyamide phase considerable deviation from the behaviour encountered when using untreated fibres was confirmed. Accordingly, while varying pretreated fibre content and also concentration of the polyamide coating, the tensile properties of the resulted composites were examined. © 1987.	en
heal.journalName	Materials Chemistry and Physics	en
dc.identifier.doi	10.1016/0254-0584(87)90095-2	en
dc.identifier.volume	17	en
dc.identifier.issue	5	en
dc.identifier.spage	453	en
dc.identifier.epage	460	en